1160 Duragloss NanoGlass Kit

Use NanoGlass on paint, glass, plastic, wheels, clear film wrap, and metal - any non-porous surface. NanoGlass used on Windshields - makes wipers work better to remove water and wiper blades will last longer too. Makes snow and ice easier to remove from car's glass.

This kit includes "Sqeaky Clean" surface prep, a product to remove previously applied wax and Nanoglass, which is a ceramic polymer sealant. Once your paint is very clean and smooth, applying Nanoglass provides a very deep "Wet Look" gloss, excellent UV blocking protection, and a mirror finish that will last two years or more with minimal maintenance. Nanoglass is like clear finger nail polish for your car. Consistency is similar to water. Residue evaporates.

Use NanoGlass on paint, wheels, head and tail lights, chrome, plastic pano roofs and windshields - any non-porous surface.

For best results clean your paint of contaminants and previously applied wax or polish before applying Nanoglass sealant.

Surface Preparation and Application directions:

1. Claybar
After washing and drying, run your fingers across your car's paint. If you feel (and hear) grainy specs of contamination, remove using clay bar and Nanoglass Quick Detailer as lubricant. You Tube to see videos on how to use claybar such as this one:
http://www.youtube.com/watch?v=opfK408uIxM

2. Swirl Removal
NanoGlass will fill light swirl marks. However If you have moderate to severe swirl marks, scratches and water spots, Use Duragloss 671 Swirlmark remover with a orbital or Porter-Cable buffer, or take your car to a professional detailing shop to correct your paint or watch these DIY Swirl Mark removal Videos on YouTube:

Part 1: http://www.youtube.com/watch?v=zUHRnHsSXZU
Part 2: http://www.youtube.com/watch?v=fxwlWijdIxM
Part 3: http://www.youtube.com/watch?v=9objUFdpsG4

3. Use Squeaky Clean to remove road film and previouly applied wax. Squeaky Clean is a Wipe on wipe off product

(Note when using Claybar or Squeaky clean on Clear Bra body armour avoid contact with the very edge of the plastic, since residue can be difficult to remove from the edges. You can use blue painters tape over such edges to avoid contact. Do not use Squeaky clean on flat black plastic trim. Remove road oil with Charcoal Lighter fluid, but do not use Lighter Fluid on clear body armour)

4. Apply NanoGlass Sealant
After you have prepared your paint and have a very silky smooth surface, spray a small amount of NanoGlass onto the entire face of the applicator pad. DO NOT APPLY Nanoglass in direct sunlight. Apply on a cool surface, 50-80 degrees. Apply a thin even coat of NanoGlass onto 2x2 foot sections at a time, with circular and back and forth motions until residue evaporates. After product is dry, you can buff, if necessary, with #9003 polishing cloth and #921 Fast Clean and Shine. A second coat of NanoGlass can be applied if desired.

5. If you should see streaks remove by wiping Nanoglass Quick Detailer with #9003 microfiber cloth and a second plush microfiber cloth to buff.

6. Maintenance
No matter what you use to add gloss to your paint, contaminants will continue to fall out of the air onto your car. So to maintain that high gloss, wash car as needed with Duragloss #901 PH Neutral Car Shampoo. Use Nanoglass Quick Detailer and plush microfiber to remove light dust between car washes, and to remove bird droppings, and finger prints etc.
(Tips: to remove excess rinse water, remove nozzle from your hose and rinse car starting at the top, with natural low flow of water, ie no extra pressure. Gravity pulls the excess water off the car. or take your car for a quick spin, then finish with #9002 Plush Drying Towel. I also suggest carrying Nanoglass Quick Detailer and a plush polishing cloth in your car to clean away those unexpected bird droppings etc. Never use an automatic car wash that uses brushes as the bristles can cause swirl marks. Use a touchless car wash or hand wash)

Add to my order. 



Review Order and/or Check Out
Price: $80.00